Skip to Content
MilliporeSigma
  • Air to lung partition coefficients for volatile organic compounds and blood to lung partition coefficients for volatile organic compounds and drugs.

Air to lung partition coefficients for volatile organic compounds and blood to lung partition coefficients for volatile organic compounds and drugs.

European journal of medicinal chemistry (2007-06-05)
Michael H Abraham, Adam Ibrahim, William E Acree
ABSTRACT

Values of in vitro gas to lung partition coefficients, K(lung), of VOCs have been collected from the literature. For 44 VOCs, application of the Abraham solvation equation to log K(lung) yielded a correlation with R(2)=0.968 and S.D.=0.25 log units. Combination of the log K(lung) values with log K(blood) values leads to in vitro blood to lung partition coefficients, log P(lung) for 43 VOCs; an Abraham solvation equation correlated these values with a very poor R(2)=0.262 but with a very good S.D.=0.190 log units. Values of in vivo log P(lung) for 80 drugs were collected, and were correlated with R(2)=0.647 and S.D.=0.51 log units. When the log P(lung) values for VOCs and drugs were combined, an Abraham solvation equation could correlate the 123 compounds with R(2)=0.676 and S.D.=0.43 log units. Division of the 123 compounds into a training set and a test set, showed that the training equation could predict log P(lung) values with an average error of 0.001 and a standard deviation of 0.44 log units; for drugs in the combined test set the average error was 0.02 and the standard deviation 0.43 log units.

MATERIALS
Product Number
Brand
Product Description

Supelco
Dichloromethane solution, contains 10 % (v/v) methanol
Sigma-Aldrich
Toluene, suitable for HPLC, ≥99.9%
Supelco
Methanol solution, contains 0.10 % (v/v) formic acid, UHPLC, suitable for mass spectrometry (MS), ≥99.5%
Sigma-Aldrich
Diethyl ether, contains 1 ppm BHT as inhibitor, anhydrous, ≥99.7%
Sigma-Aldrich
Heptane, biotech. grade, ≥99%
Supelco
Toluene, HPLC grade, 99.8%
Sigma-Aldrich
Salicylic acid, ≥99%, FG
Sigma-Aldrich
1-Propanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
2-Butanone, suitable for HPLC, ≥99.7%
Sigma-Aldrich
Heptane, suitable for HPLC, ≥99%
Sigma-Aldrich
2-Methyl-1-propanol, suitable for HPLC, 99.5%
Sigma-Aldrich
Toluene, suitable for HPLC, 99.9%
Sigma-Aldrich
Diethyl ether, suitable for HPLC, ≥99.9%, inhibitor-free
Sigma-Aldrich
Heptane, suitable for HPLC, ≥96%
Sigma-Aldrich
Ethanol, puriss. p.a., absolute, ≥99.8% (GC)
Sigma-Aldrich
Toluene, ACS reagent, ≥99.5%
Sigma-Aldrich
Diethyl ether, reagent grade, ≥98%, contains ≤2% ethanol and ≤10ppm BHT as inhibitor
Sigma-Aldrich
Toluene, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.7% (GC)
Sigma-Aldrich
2-Methyl-1-propanol, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Sigma-Aldrich
1-Propanol, ≥99% (GC), purum
Sigma-Aldrich
Diethyl ether, ACS reagent, anhydrous, ≥99.0%, contains BHT as inhibitor
Sigma-Aldrich
Heptane, ReagentPlus®, 99%
Sigma-Aldrich
2-Butanone, ReagentPlus®, ≥99%
Sigma-Aldrich
2-Butanone, ACS reagent, ≥99.0%
Sigma-Aldrich
2-Methyl-1-propanol, 99.5%
Sigma-Aldrich
Diethyl ether, anhydrous, ACS reagent, ≥99.0%, contains BHT as inhibitor
Sigma-Aldrich
Diethyl ether, ACS reagent, ≥98.0%, contains ≤2% ethanol and ≤10ppm BHT as inhibitor
Sigma-Aldrich
Toluene, ACS reagent, ≥99.5%
Sigma-Aldrich
Chloroform, ACS reagent, ≥99.8%, contains amylenes as stabilizer
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, 99.93%