Skip to Content
MilliporeSigma
All Photos(1)

Documents

765112

Sigma-Aldrich

Poly(L-lactide)

average Mn 10,000, PDI ≤1.1

Synonym(s):

PLA, PLLA, Polylactide, L-Lactide polymer, PLA, Poly(L-Lactic acid)

Sign Into View Organizational & Contract Pricing
All Photos(1)

About This Item

Linear Formula:
H(C3H4O2)nOCH3
UNSPSC Code:
12162002
NACRES:
NA.23

form

solid

Quality Level

100

optical activity

[α]22/D -150°, c = 0.5% in chloroform

mol wt

average Mn 10,000

degradation timeframe

>3 years

transition temp

Tm 162-167 °C

PDI

≤1.1

storage temp.

2-8°C

Looking for similar products? Visit Product Comparison Guide

Related Categories

General description

Poly (L-lactide) is a semi-crystalline polymer which exhibits strong optical rotation and good mechanical properties. It is mostly used in the synthesis of degradable polymers which are used in orthopaedic devices, in dental applications, as scaffolds for autografted new skin, wound covers, anastomose systems and stents. They are biodegradable since the polyester backbone degrades by simple hydrolysis to form non-toxic compounds.

Application

Drug Delivery including coating nanoparticles; end-group functionalization; macroinitiator or block precursor.

Features and Benefits

High initial strength, good strength retention and high amount of crystallinity, as much as 70%, which in turn is responsible for the very slow degradation rate.

Storage Class

11 - Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Customers Also Viewed

Slide 1 of 6

1 of 6

Polyvinyl alcohol (PVA) printing filament 2.85 mm

Sigma-Aldrich

901031

Polyvinyl alcohol (PVA) printing filament

Polyvinyl alcohol (PVA) printing filament 1.75 mm

Sigma-Aldrich

901029

Polyvinyl alcohol (PVA) printing filament

Poly(L-lactide) viscosity ~4.0 dL/g, 0.1 % (w/v) in chloroform(25 °C)

Sigma-Aldrich

95468

Poly(L-lactide)

vibrant-m

GF50233014

Poly L Lactic Acid - Biopolymer

vibrant-m

GF45989881

Polylactic Acid - Biopolymer

Poly(D,L-lactide) inherent viscosity 0.55-0.75 dL/g (lit.)

Sigma-Aldrich

531162

Poly(D,L-lactide)

Effect of poly (ethylene glycol)-block- poly (L-lactide) on the poly [(R)-3-hydroxybutyrate]/poly (L-lactide) blends
Yoon, J. S., Lee, W. S., Kim, K. S., Chin, I. J., Kim, M. N., & Kim, C.
Eur. Polymer J., 36(2), 435-442 (2000)
Chemical synthesis of polylactide and its copolymers for medical applications
Bendix, D.
Polymer Degradation and Stability, 59(1), 129-135 (1998)
Synthesis and thermal properties of novel star-shaped poly (l-lactide)s with starburst PAMAM-OH dendrimer macroinitiator.
Zhao, Y. L., Cai, Q., Jiang, J., Shuai, X. T., Bei, J. Z., Chen, C. F., & Xi, F.
Polymer, 43(22), 5819-5825 (2002)
Wolf, Florian F.; et al.
Macromolecules, 42, 5622-5628 (2009)
Zhang, Wen-Bin; et al.
Macromolecules, 44, 2589-2596 (2011)
View All Related Papers

Articles

Properties and Applications of Functionalized Graphene Oxide

Professor Aran (Claremont University, USA) thoroughly discusses the engineering of graphene based materials through careful functionalization of graphene oxide, a solution processable form of graphene.

Electrospun Nanofibers for Drug Delivery Systems

Local delivery of bioactive molecules using an implantable device can decrease the amount of drug dose required as well as non-target site toxicities compared to oral or systemic drug administration.

Poly(Glycerol Sebacate) in Tissue Engineering and Regenerative Medicine

The world of commercial biomaterials has stagnated over the past 30 years as few materials have successfully transitioned from the bench to clinical use. Synthetic aliphatic polyesters have continued to dominate the field of resorbable biomaterials due to their long history and track record of approval with the U.S. Food and Drug Administration (FDA).

Fabrication of Drug-loaded Microparticles Using Hydrogel Technology and Recent Innovation in Automation

Microparticle drug delivery systems have been extensively researched and applied to a wide variety of pharmaceutical and medical applications due to a number of advantages including injectability, local applicability to target tissues and sites, and controlled drug delivery over a given time period.

See All

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service