1.00316
Hydrochloric acid
25%, for analysis EMSURE®
Synonym(s):
Hydrochloric acid solution, Hydrochloric acid 25%, Hydrogen chloride solution
About This Item
Recommended Products
product name
Hydrochloric acid solution, 25% for analysis EMSURE®
vapor pressure
12 hPa ( 20 °C)
Quality Level
product line
EMSURE®
assay
≥25.0% (alkalimetric)
form
liquid
impurities
≤0.01 ppm As (Arsenic)
≤0.010 ppm Cd (Cadmium)
≤0.010 ppm Co (Cobalt)
≤0.010 ppm Li (Lithium)
≤0.010 ppm Mn (Manganese)
≤0.010 ppm Sr (Strontium)
≤0.010 ppm V (Vanadium)
≤0.020 ppm Ba (Barium)
≤0.020 ppm Be (Beryllium)
≤0.020 ppm Cr (Chromium)
≤0.020 ppm Cu (Copper)
≤0.020 ppm Mo (Molybdenum)
≤0.020 ppm Ni (Nickel)
≤0.020 ppm Pb (Lead)
≤0.050 ppm Al (Aluminium)
≤0.050 ppm Ge (Germanium)
≤0.050 ppm Tl (Thallium)
≤0.050 ppm Zn (Zinc)
≤0.100 ppm Bi (Bismuth)
≤0.100 ppm K (Potassium)
≤0.100 ppm Mg (Magnesium)
≤0.100 ppm Ti (Titanium)
≤0.100 ppm Zr (Zirconium)
≤0.200 ppm Fe (Iron)
≤0.5 ppm Free chlorine (Cl)
≤0.500 ppm Ca (Calcium)
≤0.500 ppm Na (Sodium)
≤1 ppm NH4 (Ammonium)
≤1 ppm Sulfate (SO4)
≤1 ppm Sulfite (SO3)
≤50 ppm Bromide (Br)
ign. residue
≤5 ppm (as SO4)
color
APHA: ≤10
pH
<1 (20 °C in H2O)
kinematic viscosity
1.73 cSt(20 °C)
bp
107 °C/1013 hPa
SMILES string
Cl
mp
-52 °C
density
1.12 g/cm3 at 20 °C
storage temp.
2-30°C
InChI
1S/ClH/h1H
InChI key
VEXZGXHMUGYJMC-UHFFFAOYSA-N
Looking for similar products? Visit Product Comparison Guide
Related Categories
General description
Application
- Research on the Synthesis of Zinc-Ammonium Phosphate Using Galvanic Waste Sludge as a Source of Zinc: This study explores a novel approach using hydrochloric acid solution in the synthesis process aimed at valorizing waste materials. The article demonstrates a chemical strategy that enhances resource recovery, significantly contributing to waste minimization in industrial practices (Morgovan et al., 2024).
- Contactless conductivity sensor employing moist paper as absorbent for in-situ detection of generated carbon dioxide gas: The study integrates hydrochloric acid solutions in the development of a novel, cost-effective contactless conductivity sensor. This sensor uses a simple paper-based system for the in-situ monitoring of gases, providing a significant tool in environmental monitoring and analysis (Nacapricha et al., 2020).
Analysis Note
Legal Information
signalword
Danger
hcodes
Hazard Classifications
Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1B - STOT SE 3
target_organs
Respiratory system
Storage Class
8B - Non-combustible, corrosive hazardous materials
wgk_germany
WGK 1
flash_point_f
Not applicable
flash_point_c
Not applicable
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Protocols
Preparation of a standard solution for Monochloramine.
Photometric determination with pyridylazoresorcinol (PAR) subsequent to acid extraction
AQA Standard for free chlorine - Preparation of a standard solution for free chlorine - Preparation of a stock solution of free chlorine: First prepare a 1:10 dilution using a sodium hypochlorite solution containing approximately 6 - 14 % of active chlorine. For this pipette 10 ml of sodium hypochlorite solution into a calibrated or conformity-checked 100-ml volumetric flask and then make up to the mark with water for analysis.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service